Hedge trimmer, also known as hedge clippers, is a portable garden tool for single person use. It is suitable for tea gardens, parks, gardens, roadside hedges and other landscaping professional pruning. Hedge trimmers can trim flat, diagonal, square, round, trapezoidal or special shapes according to the requirements of the job, and the cuts are smooth and beautiful. Hedge trimmers are very suitable for families, property communities, institutions and other use.

1. Please be sure to read the instruction manual carefully before use. Make clear the performance of the machine and the precautions for use.

2. The hedge trimmer is intended for trimming hedges and shrubs. To avoid accidents, do not use it for other purposes.

3. Hedge trimmers are fitted with cutting knives that reciprocate at high speed and can be dangerous if operated incorrectly. So do not use the hedge trimmer when you are tired or uncomfortable, after taking cold medicine or after drinking alcohol.

4. The gas emitted from the engine contains carbon monoxide, which is harmful to the human body. Therefore, do not use the hedge trimmer in poorly ventilated areas such as indoors, in greenhouses or in tunnels.

5. Do not use it on the following occasions: 

(1) When it is difficult to maintain a stable working position due to slippery footing.

(2) When it is difficult to confirm the safety around the work site due to dense fog or at night.

(3) When the weather is bad (rain, wind, thunder, etc.). .

6. When using the hedge trimmer for the first time, be sure to ask an experienced person to instruct you in the use of the hedge trimmer before you start the actual operation.

7. Excessive fatigue can reduce concentration, which can be a cause of accidents. Do not overstretch the operating programme. Each continuous operation should not exceed 30 to 40 minutes, followed by a 10 to 20 minute break, and the operating time in a day should be limited to less than two hours.

8. Minors are not allowed to use hedge trimmers.

1. The fuel used in the engine of the hedge trimmer is a mixture of motor oil and petrol, which is flammable. Do not refuel or store fuel in places where it may catch fire, such as incinerators, burners or cookers etc.

2. Do not smoke when working or refueling.

3. If there is no fuel in the process of using, you must stop the engine first and make sure there is no smoke or fire around before refueling.

4. If fuel is spilled during refueling, be sure to wipe the fuel adhering to the body before starting the engine.

5. Seal the container after refuelling and then start the engine more than 3 meters away from the fuel container.

1. Before starting the operation, find out the condition of the site (topography, nature of the hedge, location of obstacles, danger level around the site, etc.) and remove obstacles that can be moved.

2. The danger zone is defined as a 15-metre radius from the centre of the operator. To prevent others from entering the area, rope it off or put up a wooden sign as a warning. In addition, when several people are working at the same time, they should greet each other from time to time and keep a certain safety distance.

3. Before starting the operation, carefully check all parts of the machine body, and make sure that there is no loose screws, oil leakage, damage or deformation before starting the operation. Especially the blade and blade connection parts should be carefully checked.

4. Make sure that the blade is not chipped, cracked, or bent before using it. Never use a blade that is abnormal..

5. Please use a sharp blade that has been ground.

6. When grinding the blade, in order to prevent the blade from cracking, be sure to file the root of the tooth into an arc.

7. After tightening the screws on the blade, you should first turn the blade by hand to check whether there is up and down swing or abnormal sound. If there is up and down swing, it may cause abnormal vibration or blade fixed part of the loosening.